Po pritet për figurë produkti
,

CPU COOLER ARCTIC LIQUID FREEZER III 240 A-RGB

Gjendja:

Ka stok

Take advantage of Arctic expertise

  • The Liquid Freezer III A-RGB is ready to use thanks to its pre-installed radiator fans in push configuration.
  • The fan cables are integrated into the ducting of the hoses so that only one cable needs to be connected to the motherboard.
  • MX-6 thermal paste included
  • PWM-controlled 60 mm VRM fan provides socket area cooling when VRM cooling is insufficient, in case of poor airflow or especially in overclocking scenarios.
  • The Liquid Freezer III A-RGB is equipped with a specially developed in-house PWM-controlled water pump that has been optimised in terms of performance and noise.
  • The improved cold plate with an extended fin surface and optimised water lines allows the Liquid Freezer III to increase performance while maintaining quiet operation.
  • The cooling surface of the 38 mm thick radiator has been extended by 23% thanks to the increased fin stack. This not only provides better heat dissipation, but also a greater volume of liquid.
  • The Liquid Freezer III A-RGB relies on P-series fans with high static pressure.

9,500 L

Ka stok

CPU COOLER ARCTIC LIQUID FREEZER III 240 A-RGB

Arctic Liquid Freezer III A-RGB: bright and powerful

With the Liquid Freezer III A-RGB all-in-one CPU water cooling kit, Arctic puts all its know-how at the service of gaming thanks to an improved pump specially developed in-house and controlled by PWM. Thanks to this system, it doesn’t run at full load all the time, but adjusts its operation to the temperature of the processor to limit its noise level at rest. The system is completed by high static pressure fans and another 60 mm fan near the pump in charge of cooling the motherboard’s VRM circuits.

Take advantage of Arctic expertise

  • The Liquid Freezer III A-RGB is ready to use thanks to its pre-installed radiator fans in push configuration.
  • The fan cables are integrated into the ducting of the hoses so that only one cable needs to be connected to the motherboard.
  • MX-6 thermal paste included
  • PWM-controlled 60 mm VRM fan provides socket area cooling when VRM cooling is insufficient, in case of poor airflow or especially in overclocking scenarios.
  • The Liquid Freezer III A-RGB is equipped with a specially developed in-house PWM-controlled water pump that has been optimised in terms of performance and noise.
  • The improved cold plate with an extended fin surface and optimised water lines allows the Liquid Freezer III to increase performance while maintaining quiet operation.
  • The cooling surface of the 38 mm thick radiator has been extended by 23% thanks to the increased fin stack. This not only provides better heat dissipation, but also a greater volume of liquid.
  • The Liquid Freezer III A-RGB relies on P-series fans with high static pressure.

Technical specifications & manual

General Specifications
Warranty
6 Years
TIM
MX-6 (0.8 g)
Operating Ambient Temperature
0—40 °C
PI | NNPI
308 | 230
LED Connector
3-Pin A-RGB Connector
All-In-One Connector
4-Pin PWM Connector
Splitt Connector
3x 4-Pin PWM Connector
Weight
1490 g
Compatibillity
Intel
1851, 1700
AMD
AM5, AM4
Pump Specifications
Pump
800—2800 rpm (PWM controlled)
Current | Voltage
0.35 A | 12 V DC
Cold Plate
Copper, Micro Skived Fins
Tube Length
450 mm
Tube Diameter
Outer: 12.4 mm
Inner: 6.0 mm
Radiator Specifications
Material
Aluminium
Dimensions
277 (L) x 120 (W) x 38 (H) mm
VRM Modul Specifications
VRM Fan
400—2500 rpm (PWM controlled)
Current | Voltage
0.05 A | 12 V DC
LEDs
12x A-RGB LEDs
Current | Voltage
0.40 A | 5 V DC
Fan Specifications
General
2x P12 PWM PST A-RGB
Speed
200—2000 rpm
Air Flow
48.82 cfm | 82.91 m3/h
Static Pressure
1.85 mmH2O
Bearing
Fluid Dynamic Bearing
Current | Voltage
0.11 A | 12 V DC
Cable Lenght
40 mm
Connector
4-Pin PWM Connector
RGB Specifications
LEDs
12x A-RGB LEDs
Current | Voltage
0.40 V | 5 V DC
Cable Lenght
40 mm + 80 mm Splitter Cable
Connector
3-Pin A-RGB Connector + 3-Pin Plug
Kategori: ,

Produkte të afërt